Malaysia

BS Standard Attachment
Chain Series


 

 

BS Standard Attachment Chain

tsubaki-rs-k1

For common applications, Tsubaki can provide you with an outstanding range of Attachment Chain. The chain is manufactured according to the appropriate European Standards.

Please also refer to here for our product lineup for Attachment Chain.

Construction
This chain is based on standard BS roller chain and assembled with attachments for conveying.

Key Features

  • Due to the small pitch of these chains, the drive design is more compact.
  • Usually sprockets with a large number of teeth are used. The chain speed does not vary significantly as the chain engages with sprockets. With less impact, there is also less noise generated as a result of the impact between the roller and sprocket tooth.
  • These chains may be used for high speed conveyor applications.
  • A wide variety of standard and special attachments are available for this chain series.

Customised Pre-Lubrication Service
Proper lubrication is the key to extend the life and improve the performance of a chain. In order to get the best performance in general applications (-10°C to +60°C), all BS drive chains are pre-lubricated. BS attachment chains however are NOT prelubricated, but have been treated with rust preventive oil for protection and therefore need to be lubricated before the chain is installed. The reason Tsubaki does not pre-lubricate BS attachment chains is due to the fact that attachment chains often have to function in various environments where standard lubrication cannot be used.

For special applications and on customer's requirement, Tsubaki can provide attachment chains which are pre-lubricated with a special lubricant which include:

  • High temperature
  • Low temperature
  • Food safe
  • Outdoor exposure
  • Dusty environment

Please consult Tsubaki for more detailed information.

Application Example
BS Standard attachment chain is used for short conveyor runs (usually less than 10 metres) and for conveying small and reasonably lightweight products. This chain is also suitable for conditions where noise levels need to be kept to a minimum.

Standard Product Range
The product range for our standard attachment chains is:

  • BS Single Pitch Standard chain + standard attachments
  • BS Single Pitch RF chain with fl at shaped link plates
  • ANSI Single Pitch Standard chain + standard attachments
  • ANSI Single Pitch HP Hollow Pin chain
  • ANSI Single Pitch CU Curved chain
  • ANSI Double Pitch Standard chain + standard attachments
  • ANSI Double Pitch HP Hollow Pin chain

Special attachments can be designed and manufactured to meet your specific requirements.

Find more detailed information about the BS Single Pitch Standard chain here.

Find more detailed information about the BS Single Pitch RF chain here.